There are many options for renting fiber optics for your home. There are all kinds of tariffs, with different prices and also higher or lower speeds. However, before you hire one maximum fiber optic tariff To achieve higher speed, it is advisable to consider a few factors. We will talk about them in this article so that you can decide whether you are really interested or not and what you should always watch.
One problem that can arise is when you hire one higher internet tariff and you can’t take advantage of it. This can happen, for example, if you do not have adapted devices. Before you sign up for the highest possible fiber optic tariff, you should therefore check a few aspects that we mention below.
What to check before increasing fiber rate?
For example, perhaps you have a 300 Mbps fiber plan and have seen the same company as you or even another company offering a 1 Gbps plan. You want a higher speed because you believe you can benefit from it, and you are thinking about upgrading to this higher speed. However, you may not be able to use it as expected.
Capacity of your devices
You should carefully check the capacity of your devices. You may connect a computer via an Ethernet cable, but also via WiFi. In both cases it must be compatible with the speed you want to rent and you can benefit from it. Otherwise you would not be able to achieve this capacity.
For example, you should check whether your computer has the following Gigabit network card. Otherwise you won’t be able to achieve more than 100 symmetrical Mbps. If you contract at 1Gbps, you would be wasting a lot of that capacity. But you should also see that you have it compatible cables at this speed because they must be at least CAT 5e.
In relation to Wireless Internet access, so similar. It is important to have a WiFi card that can work at high speeds. It’s not uncommon to find adapters that can’t operate at more than 600 or 800 Mbps. This card must be dual-band and also compatible with the latest Wi-Fi 6 protocol.
Routers
You should also pay attention to which router you have and what capacity it has. If you connect via cable, you shouldn’t have any major problems other than the gigabit connection and good condition. However, if you want to connect via Wi-Fi, there are some essential features you need to consider to take advantage of this new higher tariff.
To achieve 1Gbps wireless you must have the following Wi-Fi 6. Logically it has to be a double band. You can check the maximum supported theoretical speed, because if it is lower you will not be able to take advantage of the 1000 Mbps that you could have under optimal circumstances if you set the maximum fiber speed.
Be careful with 10Gbps
We’ve focused on what you should look for if you want to take advantage of a 1Gbps fiber plan, which is the most common. However, there is already the possibility of even Rent 10 Gbit/s. At least for now it is not the most common problem, but it is possible that it will become more common in a short time.
In this case, you need a very modern network card with a capacity of 10 Gbit/s. The same applies to the router. In fact, in many cases you will not be able to use this speed because the devices are not adapted. You wouldn’t be able to achieve that 10Gbps and would have to change routers and network adapters.
Therefore, keep everything we have explained in mind when purchasing a higher fiber plan. If it’s 1Gbps you shouldn’t have any problems as most routers these days have Gigabit Ethernet ports as well as good WiFi capacity. Yes, you might face more difficulties if you are using older devices. However, at 10 Gbit/s you have to be more careful and make sure you are using compatible devices.
