To achieve a good wireless Internet connection, an option to consider is to install a Wi-FI repeater. They are easy to use, inexpensive, and can give good results. There is no doubt that what we have mentioned does not always happen. It is possible that you will see that the coverage does not improve, nor the speed. We will tell you about the most common mistake that you should never make if you do not want to have problems with your wireless repeater.
Don’t go overboard with the iterator
When we use a Wi-Fi repeater, it usually happens because the signal does not reach the home area well. For example: a room that is far from the road. The problem is that we put a wireless repeater in any area, simply because there is the best signal we need.
What will happen? Often the repeater travels further. Although it receives a better signal than a mobile phone or computer, being too far away may mean that it does not receive enough coverage to be able to offer a connection to the other devices we connect. It usually means that we are further from the moving route.
What you need to do is place the repeater in an area where it will receive a good signal. Obviously, you’ll have to move it out of the way so it can serve other devices, but without moving too far. You need to find a balance point to receive enough signal to be able to connect to other devices.
It is also wrong to place an obstacle in the field or on large walls that can block the signal. Remove from devices that use Bluetooth, for example, when they use a frequency of 2.4 GHz, you should also be careful to place it in a corner, where it receives problems and emits a signal.
See the alternative to the repeater
The problem comes when you need to route the link further from the route. As you can see, it can be a very repetitive problem and you could not connect properly. So what you can do is look for an alternative that works better to get a connection to other sites and, for example, a good Internet to watch 4K videos.
Can you use both? One of them is to have PLC devices. There are machines that work through electrical wiring. You connect one next to the road and the other to another house. They use electrical wiring to carry the Internet connection and are quite stable, with less loss than if you connect wirelessly to a router.
I also choose to use a Wi-Fi Mesh system. In this case, several satellites are connected to each other. Instead of connecting to a router, like a wireless repeater, they connect to each other. This will allow the signal to reach further, so that you can cover an area of ​​several hundreds of square meters. It is most useful in a large house or when there are several floors.
As you can see, it is an error to move the iterator from the path. That will weaken the signal and you won’t really be able to connect to other devices. What you can do is use an alternative, such as PLC devices or Mesh systems. This way you can improve your link and go further.
